In the photo below, astronaut Alan Bean works at the Apollo 12 lander. Describe the horizon and the surface you see. What kind of terrain did they land on for this, the second human Moon landing, and why ?

Aplane flies directly between two cities, a and b, which are separated by . from a to b, the plane flies into a headwind. on the return trip from b to a, the wind velocity is unchanged. the trip from b to a takes less than the trip from a to b. what is the airspeed of the plane, assuming it is the same in both directions

Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)

How does the motion of an airplane compare to the motion of a rocket ?