Estimate the roll force and total power for annealed low-carbon steel strip 200 mm wide and 10 mm thick, rolled to a thickness of 6 mm. the roll radius is 200 mm, and the roll rotates at 200 rpm. let μ = 0.1. compare this high frictional force and power with the low frictional forces and power. the values of k and n are 530 mpa and 0.26, respectively.

30 points - when can a theory be modified if a new type of technology allows for new observations that raise new questions? a. immediately, while the questions about the theory are being asked b. after new hypotheses related to the theory are tested in experiments c. only after the new observations disprove all parts of the theory d. while scientists begin to think about how the theory could improve

At 20∘c, the hole in an aluminum ring is 2.800 cm in diameter. you need to slip this ring over a steel shaft that has a room-temperature diameter of 2.804 cm . 1. to what common temperature should the ring and the shaft be heated so that the ring will just fit onto the shaft? coefficients of linear thermal expansion of steel and aluminum are 12×10−6 k−1 and23×10−6 k−1 respectively.

Entropy can only be decreased in a system if