Physics, 16.12.2019 23:31, leianagaming

For a bronze alloy, the stress at which plastic deformation begins is 267 mpa and the modulus of elasticity is 115 gpa. (a) what is the maximum load (in n) that may be applied to a specimen having a cross-sectional area of 377 mm2 without plastic deformation? n (b) if the original specimen length is 127 mm, what is the maximum length (in mm) to which it may be stretched without causing plastic deformation?

Answers: 2

Show answers

Other questions on the subject: Physics

Physics, 22.06.2019 15:30, bloodry

Two point charges are separated by a certain distance. how does the strength of the electric field produced by the first charge, at the position of the second charge, change if the second charge is doubled? a. the field does not change b. the field strength decreases by half. c. the field strength doubles d. the field strength quadruples

Answers: 1

continue

Physics, 22.06.2019 16:30, aliviadushane

He latent heat of vaporization for ethyl alcohol is 854 j/g. the amount of energy, rounded to the nearest whole number, needed to change 5.20 grams of ethyl alcohol from a liquid to a gas is

Answers: 2

continue

Physics, 23.06.2019 02:00, jamesnech66

How can you measure the amplitude of a longitudinal wave?

Answers: 2

continue

Physics, 23.06.2019 05:30, efraruiz02

Oxygen gas enters well-insulated diffuser at 25 lbf/in.2, 420r, with a velocity of 860 ft/s through a flow area of 1.6 in.^2. at the exit, the flow area is 12 times the inlet area, and the velocity is 19 ft/s. the potential energy change from inlet to exit is negligible. assuming ideal gas behavior for the oxygen and steady-state operation of the diffuser, determine the following: (a) the exit temperature, in r(b) the exit pressure, in lbf/in.^2 (c) the mass flow rate, in lb/s

Answers: 3

continue

Do you know the correct answer?

For a bronze alloy, the stress at which plastic deformation begins is 267 mpa and the modulus of ela...