Interference patterns do not have an infinite number of lines, since there is a limit to how big ‘m’ can be. what is the highest order constructive interference possible if the slit width is 0.01mm and wavelength 650nm?

Several processes form metal ore. match each process to its description. volcanic activity weathering hydrothermal energy rocks break down as they interact with air and water. arrowright density differences and other factors cause metals to concentrate in igneous rocks. arrowright seawater heats up from contact with hot rock, and metals dissolve in it. the water rises and contacts cooler water, causing metal ores to settle on the ocean floor. arrowright

How can one distinguish breccia from conglomerate? a. breccia contains angular clasts and conglomerate contains rounded clasts. b. breccia contains rounded clasts and conglomerate contains angular clasts. c. different minerals cement breccia than cement conglomerate. d. breccia contains sand and conglomerate contains silt.

Clothing made of several thin layers of fabric with trapped air in between, often called ski clothing, is commonly used in cold climates because it is light, fashionable, and a very effective thermal insulator. so it is no surprise that such clothing has largely replaced thickand heavy old-fashioned coats. (a) consider a jacket made of five layers of 0.1-mm-thick synthetic fabric (k = 0.13 w/m·°c) with 1.5-mm-thick air space (k = 0.026 w/m·°c) between the layers. assuming the inner surface temperature of the jacket to be 28°c and the surface area to be 1.25 m2, determine the rate of heat loss through the jacket when the temperature of the outdoors is 0°c and the heat transfer coefficient at the outer surface is 25 w/m2·°c. (b) what would your response be if the jacket is made of a single layer of 0.5-mm-thick synthetic fabric? what should be the thickness of a wool fabric (k = 0.035 w/m·°c) if the person is to achieve the same level of thermal comfort wearing a thick wool coat instead of a five-layer ski jacket?