Part c some hydrogen gas is enclosed within a chamber being held at 200∘c with a volume of 0.0250 m3. the chamber is fitted with a movable piston. initially, the pressure in the gas is 1.50×106pa (14.8 atm). the piston is slowly extracted until the pressure in the gas falls to 0.950×106pa. what is the final volume v2 of the container? assume that no gas escapes and that the temperature remains at 200∘c.

Imagine you had to physically add electrons, one at a time, to a previously neutral conductor. you add one electron very easily, but the second electron requires more work. in your initial post to the discussion, explain why this is. also, what happens to the work needed to add the third, fourth, fifth, and subsequent electrons

What is special about a dc circuit ?

(2) (a) you have a simple circuit that consists of only a battery (δvbat=1.5v) and two resistors with resistance r1=10ω and r2=5ω, connected in series with each other. what is the current running through the battery? (b) you re-arrange your circuit so now r2 is attached in parallel to r1 rather than in series. what is the current running through the battery? (c) you add an additional resistor r3=7ω on the same branch as r2. what is the current running through the battery? (d) what is the power dissipated in r3?