Engineering
Engineering, 06.12.2021 18:30, Steelo600

A small factory has two products (A and B). In order to keep the factory running, at least 20+k units of products must be produced each day where k is the largest digit of your student number. Product A costs $200 to produce, while Product B costs $100 to produce. The total costs must be less than $8000 as the budget each day. In addition, the market regulations require that the number of Product B cannot exceed twice the number of Product A, but must be at least more than half the number of Product A. If each Product A gives a profit of $40 and each Product B gives a profit of $60, design a simple daily production portfolio (in terms of the numbers of Products A and B to be produced) so that the total profit is maximized. • Write this problem as a simple linear programming problem with the objective and all appropriate constraints. • Find its optimal solution by solving it using two different methods (e. g., graphical method and Excel Solver/Matlab).

answer
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, skpdancer1605
Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2
Answers: 3
image
Engineering, 04.07.2019 18:10, alyssabailey7545
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
image
Engineering, 04.07.2019 18:10, michellerosas
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
image
Engineering, 04.07.2019 18:10, Fahaddie
The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length
Answers: 2
Do you know the correct answer?
A small factory has two products (A and B). In order to keep the factory running, at least 20+k unit...

Questions in other subjects:

Konu
Mathematics, 28.08.2020 18:01