Engineering, 18.08.2021 14:00, brookealexis5768

- figure is the aschematic drawing of asolid counter Shaft that supports two flat belt zulless each having ason weight. For each puller, the best rensions are parallel and the coessicient de friction between the belt and Pelley Ais oils. If a cold-drawn wNs G10180 steel shast of wintorn diameter many w material properties of allowable strength in shear and intenders be taken as 220 MPa 440 MPa respectively. Determine the minimum Preferred size diameter in accordance to the ASME code usino km= 15 and Kt=1.0. Neglect the effect of mass and thickness of belts and mass of the shaft,

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:20, mjcbs21

What is the heat treatment of metals? what is the benefit of it? why and how it's useful? answer in details, do not write by hand.

Answers: 3

continue

Engineering, 04.07.2019 18:20, 3076850

Prove the equivalence between the two statements of the 2nd law of thermodynamics (i. e., a violation of one statement leads to the violatio the other statement)

Answers: 2

continue

Engineering, 04.07.2019 19:20, amandaaarmentaa

Acircular pipe of 30mm outside diameter is placed in an airstream at 30 c and latm pressure. the air moves in cross flow over the pipe at 20 m/s, while the outer surface of the pipe is maintained at 110 c. what is the drag force exerted on the pipe per unit length? what is the rate of heat transfer from the pipe per unit length?

Answers: 1

continue

Engineering, 06.07.2019 03:30, sipstick971

An ammonia compressor has a 5% clearance volume and displacement rate of 80 l/s and pumps against a condensing temperature of 40°c. for two different temperatures of -10°c and 10°c, compute the mass flow rate of refrigerant assuming the clearance volumetric efficiency applies. discharge specific volume corresponding to-10°c and 10°c are 112.5 l/kg and 95 l/kg, respectively.

Answers: 2

continue

Do you know the correct answer?

- figure is the aschematic drawing of asolid counter Shaft that supports two flat belt zulless each...