Troubleshooting Challenge 410A
bumity is 60.7%
Indoor dry bulb temp 80°F Indoor wet bul...
Engineering, 12.04.2021 23:30, lakiethalucas
Troubleshooting Challenge 410A
bumity is 60.7%
Indoor dry bulb temp 80°F Indoor wet bulb temp 70°F
Refrigerant R410A
Outdoor ambient temp 89°F hot
Suction line temp 75°F
Liquid line temp 128ºF
Actual Condensing pressure 485 PSIG (131.1 °F)
Actual Evaporator pressure 144 PSIG (50.33 °F)
Diagnose the problem (Only one)
Low Evaporator Airflow (Low load)
Refrigerant Undercharged
Refrigerant Overcharged
High heat load (High Indoor Temperature or Leak in return duct)
Answers: 3
Engineering, 04.07.2019 18:20, RiverH246
Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point. the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.
Answers: 1
Engineering, 04.07.2019 18:20, jessie8022
Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.
Answers: 2
Engineering, 04.07.2019 19:10, ultimateapes
When subject to a steady load (within elastic range) over a long period of time, what is the major difference in material behavoir between steel and plastic?
Answers: 2