Engineering, 26.03.2021 06:00, nicole10perez

2. Indique qué función del lenguaje predomina en cada uno de estos textos: ¡Haz silencio!
¡Estoy muy orgulloso de ti!
“La magia de sus ojos me hipnotiza”
¿Sigues en línea?
¡Te ordeno que lo hagas en este momento!
“Mañana habrá buen tiempo”
“Su sonrisa iluminaba todo a su alrededor”
¡Estoy exhausto!
No escucho bien…hay mucha interferencia
“Una copa de vino y una música suave lo hicieron olvidar sus penas”
¿Sensacional es un adjetivo grandilocuente?
¡Cuanta felicidad siento en este momento!
“Las clases serán suspendidas hasta nuevo aviso”
¡Carlota!, abre la puerta por favor
¿Qué significa la palabra fe?
¡Ay!, como de duele mi pie

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, qwertylol12345

Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.

Answers: 2

continue

Engineering, 04.07.2019 18:10, kevin72836

Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?

Answers: 2

continue

Engineering, 04.07.2019 18:20, rbgrh9465

An open feedwater heater operates at steady state with liquid entering at inlet 1 with t? = 40°c and pl = 1 .2 mpa. water vapor att2-200°c and p2 = 1.2 mpa enters at inlet 2. saturated liquid water exits with a pressure of pa 1.2 mpa. neglect heat transfer with the surroundings and all kinetic and potential energy effects, determine the mass flow rate of steam at inlet 2 if the mass flow rate of liquid water at inlet 1 is given as 2 kg/s.

Answers: 3

continue

Engineering, 04.07.2019 19:20, GusGus11

The power source in a certain welding setup generates 3500w that is transferred to the low carbon steel work with a heat transfer factor of 0.85. the melting factor in the operation is 0.45. a continuous fillet weld is to be made with a cross-sectional area of 23 mm2 determine the travel speed at which the welding can be accomplished.

Answers: 3

continue

Do you know the correct answer?

2. Indique qué función del lenguaje predomina en cada uno de estos textos: ¡Haz silencio!
¡Es...