Engineering, 26.03.2021 04:20, typicalemi4634
The material properties of a machine part are Sut 5 85 kpsi, f 5 0.86, and a fully corrected endurance limit of Se 5 45 kpsi. The part is to be cycled at sa 5 35 kpsi and sm 5 30 kpsi for 12 (103 ) cycles. Using the Gerber criterion, estimate the new endurance limit after cycling
Answers: 1
Engineering, 04.07.2019 18:10, hadellolo8839
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
Engineering, 04.07.2019 19:20, amandaaarmentaa
Acircular pipe of 30mm outside diameter is placed in an airstream at 30 c and latm pressure. the air moves in cross flow over the pipe at 20 m/s, while the outer surface of the pipe is maintained at 110 c. what is the drag force exerted on the pipe per unit length? what is the rate of heat transfer from the pipe per unit length?
Answers: 1
Engineering, 06.07.2019 02:30, josediaz1124
Around steel bar, made from material with a yield stress of 750mpa, is loaded so that it has stresses co locations of maximum normal stress and maximum shear stress. use maximum shear stress and maximum distortion energy theories to calculate the safety factors for initial yielding failures.
Answers: 3
Engineering, 06.07.2019 04:10, j015
Apinion having 30 involute teeth of 6,5 module rotates at 220 r/min and transmits 2 kw to a gear wheel having 70 teeth; the addendum on both wheels is 4 of the circular pitch and the angle of obliquity is 200. determine; 3.1 the lengths of the path of approach and the arc of approach 3.2 the normal force between the teeth at an instant when there is only one pair of teeth in contact
Answers: 2
The material properties of a machine part are Sut 5 85 kpsi, f 5 0.86, and a fully corrected enduran...
Mathematics, 11.06.2021 18:20
Mathematics, 11.06.2021 18:20
Computers and Technology, 11.06.2021 18:20
English, 11.06.2021 18:20
Mathematics, 11.06.2021 18:20
Social Studies, 11.06.2021 18:20
Mathematics, 11.06.2021 18:20