Engineering
Engineering, 04.03.2021 19:50, kenniedalany

Absorption: Rods of radioactive waste that are highly active are stored in cooling ponds of purified water. Usually, the rods are stored 20 feet below the surface of the water. We wish to calculate the neutron flux that reaches the surface the water. The total cross- section for an incident, room-temperature neutron onto a 1H nucleus is approximately 35 barns. The total cross-section for an incident, room-temperature neutron onto an oxygen nucleus is approximately 4 barns. A. Calculate the molecular number density of water.
B. Calculate the number density of hydrogen nuclei and the number density of oxygen nuclei.
C. Calculate the macroscopic cross-section (Z) for an incident, room temperature neutron passing through the water.
D. Calculate the mean free path ( (x) ) of a room temperature neutron in water.
E. Calculate the fraction of the radiation emitted from the rods that reach the surface of the water (1(x)/10).

answer
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, abdirahmansoloman
Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?
Answers: 1
image
Engineering, 04.07.2019 18:10, keigleyhannah30
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
image
Engineering, 04.07.2019 18:10, agpraga23ovv65c
Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.
Answers: 2
image
Engineering, 04.07.2019 18:20, CelesteN64
Most leaks in reciprocating air compressors can be detected and minimized by: (clo4) a)-detecting leakage areas using ultrasonic acoustic detector. b)-tightening joints and connections c)-replacing faulty equipment d)-all of the given options
Answers: 2
Do you know the correct answer?
Absorption: Rods of radioactive waste that are highly active are stored in cooling ponds of purified...

Questions in other subjects: