Engineering, 07.10.2020 23:01, taylorlawrence8147

A steam pipe with an exterior temperature 120◦C and outside diameter 10 cm is covered with a 5 cm layer of asbestos (k = 0.15 W m−1 K −1 ) insulation. If the outside surface of the insulation is at 35◦C, calculate the heat transfer rate from the steam pipe per unit length of pipe. Calculate the thermal resistance of the insulation for a unit length of pipe

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, xboxdude06

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

Answers: 1

continue

Engineering, 04.07.2019 18:10, wirchakethan23

Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i. d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.

Answers: 3

continue

Engineering, 04.07.2019 19:10, Mimidj9279

The sum of the normal stresses does not change as the stress state rotates through an angle. a)-trune b)- false

Answers: 2

continue

Engineering, 04.07.2019 19:10, nayi2002

The short distance from the objective lens to the object causes problems at high magnification. which of the following is the most serious? a. cleaning the object surface b. positioning the object c. reflection from the object surface. d. illumination of the object

Answers: 1

continue

Do you know the correct answer?

A steam pipe with an exterior temperature 120◦C and outside diameter 10 cm is covered with a 5 cm la...