Engineering, 12.08.2020 05:01, mia3128

A spray dryer receives distillers dried grains (DDGS) with a 65% moisture content. The spray dryer operates with dry air entering at 180 °C, 1 bar, and moist air exits at 87 °C, 1 bar, and 25% relative humidity. The volumetric flow rate of the exiting air is 310 m3/min. The solids exit the dryer completely dry. Determine The rate of dried particle flow, in kg/min The volumetric flow rate of inlet dry air, in m3/min

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, wyattlb97

Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?

Answers: 3

continue

Engineering, 04.07.2019 18:20, mjcbs21

What is the heat treatment of metals? what is the benefit of it? why and how it's useful? answer in details, do not write by hand.

Answers: 3

continue

Engineering, 04.07.2019 19:10, santosbeti90

With increases in magnification, which of the following occur? a. the field of view decreases. b. the ambient illumination decreases. c. the larger parts can be measured. d. the eyepiece must be raised.

Answers: 1

continue

Engineering, 06.07.2019 04:30, jess2652

Calculate the equilibrium concentration of vacancies per cubic meter in pure aluminum at 500°c. assume that the energy of formation of a vacancy in pure aluminum is 0.76 ev. what is the vacancy fraction at 650°c.

Answers: 3

continue

Do you know the correct answer?

A spray dryer receives distillers dried grains (DDGS) with a 65% moisture content. The spray dryer o...