Engineering
Engineering, 30.06.2020 18:01, jakiyahporter0817

Compare alternatives on the basis of their capitalized costs at i = 10% per year. Alternative E F G
First cost, $ −50,000 −300,000 −900,000
AOC, $ per year −30,000 −10,000 −3,000
Salvage value, $ 5,000 70,000 200,000
Life, years 2 4 [infinity]

answer
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:20, krojas015
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
image
Engineering, 04.07.2019 18:20, miguel454545
Along 8-cm diameter steam pipe whose external surface temperature is 900c connects two buildings. the pipe is exposed to ambient air at 70c with a wind speed of 50 km/hr blowing across the pipe. determine the heat loss from the pipe per unit length. (b) air at 500c enters a section of a rectangular duct (15 cm x 20 cm) at an average velocity of 7 m/s. if the walls of the duct are maintained at 100c. a) the length of the tube for an exit temperature of the air to be 40 0c. b)the rate of heat transfer from the air. c) the fan power needed to overcome the pressure drop in this section of the duct.
Answers: 1
image
Engineering, 04.07.2019 18:20, AnonymousLizard52303
A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.
Answers: 3
image
Engineering, 04.07.2019 19:10, gabigalvis1091
What is the main objective of using reheat rankine cycle?
Answers: 3
Do you know the correct answer?
Compare alternatives on the basis of their capitalized costs at i = 10% per year. Alternative E F G...

Questions in other subjects:

Konu
Mathematics, 25.04.2021 19:50
Konu
Mathematics, 25.04.2021 19:50
Konu
History, 25.04.2021 19:50
Konu
Social Studies, 25.04.2021 19:50