Engineering, 11.06.2020 11:57, levin69

A Small-sized Wind Turbine is schematically shown in Fig (a), and is delivering a maximum rated power of ( 50 KW ). This Wind Turbine is using " A Single-Stage- Spur- gearbox " to speed up the main Drive shaft speed from 20 rpm to 1400 rpm ( see Fig (b) ). In order to absorb shock loads , such gear box is suspended in space by two torque arms -as shown in Fig ( c ); which is attached to the turbine housing by a Bolted Joint, of 6 equally spaced Hexagonal bolts. requirements:

1- The Standard Design Procedure
2-Design of Torque arm,
3-Design of the Bolted Joint
4-Design of the used Spur gear Pair
5-Design of main Input Shaft together with its KEY
6-Select the Right Deep Groove Ball bearings; which are supporting the main input Shaft, and Finally
7-The Configuration of the Main Input Shaft (Product Concept, DFM, DFA, Dimensions, Fits, and Tolerances for mating parts)

A Small-sized Wind Turbine is schematically shown in Fig (a), and is delivering a maximum rated pow

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, theamandawhite

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

continue

Engineering, 04.07.2019 18:10, winterblanco

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false

Answers: 3

continue

Engineering, 04.07.2019 18:10, lowkeyqueenk

Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk

Answers: 1

continue

Engineering, 04.07.2019 19:10, gabrielaperezcz

Air inially occupying a volume of 1 m2 at 100 kpa, 27 c undergoes three internally reversible processes in series. process 1-2 compression to 500 kpa during which pv constant process 2-3 adiabatic expanslon to 100 kpa process 3-1: constant-pressure expansion to 100 kpa (a) calculate the change of entropy for each of the three processes. (b) calculate the heat and work involved in each process. (c) is this cycle a power cycle or refrigeration cycle?

Answers: 3

continue

Do you know the correct answer?

A Small-sized Wind Turbine is schematically shown in Fig (a), and is delivering a maximum rated powe...