Engineering, 05.05.2020 18:40, gray69
Water drains at a constant rate through a saturated soil column with a diameter of 1.5 feet and a height of 3 feet. The hydraulic head is maintained at 5 feet at the top of the column and 0.81 feet at the bottom. After a period of one hour, 199 cubic inches of water has drained through the column. What is the hydraulic conductivity of the soil in the column in cubic feet per hour
Answers: 3
Engineering, 04.07.2019 18:10, anna22684
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
Engineering, 04.07.2019 18:10, DestyHilBan1183
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
Engineering, 04.07.2019 18:10, 0436500
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Water drains at a constant rate through a saturated soil column with a diameter of 1.5 feet and a he...
Mathematics, 29.08.2020 03:01
Mathematics, 29.08.2020 03:01
Mathematics, 29.08.2020 03:01