Engineering, 05.05.2020 08:18, gabedafame26

This is done with a combinational circuit that has five inputs: S1 through S4 and C4, and three outputs, designed by x, y, and z, so that x = 1 if A = B (S = 0000) y = 1 if A < B (C4 = 0) z = 1 if A > B (C4 = 1 and S ≠ 0000) (a) Obtain the function for x, y and z respectively. (b) Design this combinational logic circuit with minimum number of gates. The combinational circuit can be implemented with the 7404 and 7408(or 7432) ICs. (c) Construct the comparator circuit and test its operation. Use at least two sets of numbers for A and B to check each of the outputs, x, y, and z.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 12:10, Ryantimes2

On a average work day more than work place firs are reorted

Answers: 1

continue

Engineering, 04.07.2019 18:10, soreese02

An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature

Answers: 2

continue

Engineering, 04.07.2019 18:20, yasyyas646646

Agas mixture consists of 8 kmol of h2 and 2 kmol of n2. determine the mass of each gas and the apparent gas constant of the mixture.

Answers: 3

continue

Engineering, 04.07.2019 18:20, aly95

An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid

Answers: 3

continue

Do you know the correct answer?

This is done with a combinational circuit that has five inputs: S1 through S4 and C4, and three outp...