A fluid flows by gravity down an 8-cm galvanized iron pipe. The pressures at the higher and lower locations are 120 kPa and 140 kPa, respectively. The horizontal distance between the two locations is 30 m, and the pipe has a slope of 1m rise per 10 m of run (horizontal distance). For a fluid with a kinematic viscosity of 10-6 m2 /s and a density of 900 kg/m3 , determine the flow rate (in m3 /s).

On a average work day more than work place firs are reorted

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?