Engineering, 23.04.2020 19:31, ItsLeyArt

Consider the flow within a round pipe. At the entrance, the flow velocity is uniform at U.. Near the inlet to the pipe, the flow velocity will be a function of of r and z. Downstream of the entrance region, the flow becomes fully-developed and the velocity profile is not a function of 2 and 8. Apply the continuity and the Navier-Stokes equations in cylindrical coordinate (Eq. 9-62, p. 475) to determine the fully-developed velocity profile within the round pipe.

a. List all the assumptions
b. Find all velocity components of the fully-developed flow in the pipe (V, V, V:)
c. Determine the expression for the fully-developed velocity profile in terms of the pres- sure gradient, 3
d. Determine the expression for the fully-developed velocity profile in terms of the max- imum velocity in the fully-developed profile, Umax.
e. Determine the expression for the fully-developed velocity profile in terms of the inlet velocity, U..
f. What is the ratio of Umax to U. for fully-developed pipe flow?

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, settasav9641

Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.

Answers: 3

continue

Engineering, 04.07.2019 18:10, ayoismeisjjjjuan

Manometers are good examples of measuring instruments, nowadays they are not as common as before. a)-capacitive probe gauges b)-gravitational gauges deformation ) gauges d)-digital gauges

Answers: 1

continue

Engineering, 04.07.2019 18:20, alexis9263

Have a greater impact on maintenance productivity than any other support group. (clo5) a)-the top management b)-inventory and purchasing c)-sub-contracting d)-cmms

Answers: 2

continue

Engineering, 04.07.2019 18:20, esmemaluma00

Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um

Answers: 2

continue

Do you know the correct answer?

Consider the flow within a round pipe. At the entrance, the flow velocity is uniform at U.. Near the...