Engineering
Engineering, 08.04.2020 02:13, Jackmcvay14

Assume the internal pressure varies cyclically in the cylinder from pmin=0 to Pmax , where Pmax is 60% of the estimated maximum pressure that will lead to failure by yielding as predicted by Tresca criterion. The Paris law for the material is da = 1.6 X 10 "(AK) 9 m/cycle CA a. Find the number of cycles for the crack of initial length 200 = 0.01 m to grow to a length 20 = 0.025 m. b. Find the number of cycles before the crack reaches critical length (i. e life of the part).

answer
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, 19deleonl
Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.
Answers: 2
image
Engineering, 04.07.2019 18:10, qwertylol12345
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
image
Engineering, 04.07.2019 18:10, wyattlb97
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
image
Engineering, 04.07.2019 18:20, rbgrh9465
An open feedwater heater operates at steady state with liquid entering at inlet 1 with t? = 40°c and pl = 1 .2 mpa. water vapor att2-200°c and p2 = 1.2 mpa enters at inlet 2. saturated liquid water exits with a pressure of pa 1.2 mpa. neglect heat transfer with the surroundings and all kinetic and potential energy effects, determine the mass flow rate of steam at inlet 2 if the mass flow rate of liquid water at inlet 1 is given as 2 kg/s.
Answers: 3
Do you know the correct answer?
Assume the internal pressure varies cyclically in the cylinder from pmin=0 to Pmax , where Pmax is 6...

Questions in other subjects:

Konu
Mathematics, 23.06.2019 02:00