Engineering, 22.02.2020 02:27, EVOLVEDTANK40
The gas phase reaction A--->B+Cfollows an elementary rate law and is to be carried out first in a PFR and then in a separate experiment in a CSTR. When pure A is fed to a 10 dm 3 PFR at 300 K and a volumetric flow rate of 5 dm 3 /s, the conversion is 80%. When a mixture of 50% A and 50% inert (I) is fed to a 10 dm 3 CSTR at 320 K and a volumetric flow rate of 5 dm 3 /s, the conversion is also 80%. What is the activation energy in cal/mol?
Answers: 1
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:10, danksans7011
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
Engineering, 04.07.2019 18:20, aly95
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
Engineering, 04.07.2019 18:20, esmemaluma00
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
Engineering, 04.07.2019 18:20, annette211pdd8v9
For a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.
Answers: 1
Do you know the correct answer?
The gas phase reaction A--->B+Cfollows an elementary rate law and is to be carried out first in a...
Questions in other subjects:
Mathematics, 24.01.2020 00:31
Chemistry, 24.01.2020 00:31
