Engineering, 26.11.2019 19:31, avahrider1
Atrapezoidal channel has a 3m bottom width and a 1: 1 side slope. it carries a discharge of 10 m3 /s at a slope of 12 cm/km. a hydraulic jump forms at an upstream depth of 0.6 m. calculate the specific momentum function, the critical flow depth and the conjugate depth. if you place baffle blocks to induce the hydraulic jump where the upstream depth is 0.4 m and the flow depth downstream of the baffles is 1.2 m, what is the force on the baffles blocks
Answers: 3
Engineering, 03.07.2019 14:10, cowgyrlup124
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
Engineering, 04.07.2019 18:10, redrosesxx
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
Engineering, 04.07.2019 18:10, Strick1530
Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.
Answers: 2
Engineering, 04.07.2019 18:10, oliviasoreo92
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
Atrapezoidal channel has a 3m bottom width and a 1: 1 side slope. it carries a discharge of 10 m3 /s...
Arts, 24.06.2019 23:00
Mathematics, 24.06.2019 23:00