Engineering
Engineering, 12.11.2019 20:31, reecedstceklein

We know that the output ripple voltage of the regulator constructed in step #1 of the procedure is not absolutely zero. if it was impossible to observe an output ripple, explain what caused this limitation. explain why the output voltage drops below its design value when the maximum load current is exceeded

answer
Answers: 1
Show answers

Similar questions

Предмет
Physics, 18.07.2019 03:30, dumngirl2504
Do the following and plot all the waveforms. a boost converter is required to have an output voltage of 12 v and supply a load current of 1.5 a. the input voltage varies from 2.7 , 4.2·ev a control circuit adjusts the duty ratio to keep the output voltage constant. select the switching frequency. determine a value for the inductor such that the variation in inductor current is no more than 30 percent of the average inductor current for all operating conditions. determine a value of an ideal capacitor such that the output voltage ripple is no more than 1 percent. determine the maximum capacitor equivalent series resistance for a 1 percent ripple. f-500khz
Answers: 2
continue
Предмет
Physics, 01.10.2019 04:30, sloansters9315
Assume you have a power supply using a bridge rectifier. the output of the supply should be 13.8 v with a maximum output current of 50 a. if we assume the voltage regulator in series with the positive output leg requires a minimum of 1.2 v, the input voltage at the regulator has a minimum value of 15 v. (a) draw the circuit. (b) determine the value of c (filter capacitor after rectifier and before regulator) that produces a maximum voltage ripple at the input to the regulator of 5v. (c) determine the rms voltage of the secondary of the transformer.
Answers: 2
continue
Предмет
Engineering, 14.11.2019 07:31, oofdiegoofdie5562
Aboost converter based power factor correction circuit needs to operate with universal input voltage, i.e the input voltage can be either 120v (rms)+/- 10% at 60 hz or 240 v(rms) +/- 10% at 50 hz. the output voltage is regulated at 400 v dc and the maximum (average) output power is 1kw. (a) calculate the value of inductance needed to keep its peak-peak ripple current to be less than 10% of the peak fundamental frequency line current at the maximum input voltage and full load condition. (b) calculate the value of output capacitance needed to keep the peak-peak ripple (at twice the line frequency) to be less than 10% of the nominal output voltage at any operating condition. (c) calculate the maximum rms ripple current in the output capacitor (neglect switching frequency ripple). (d) draw over a complete fundamental period corresponding to 240v (rms), 50 hz input.
Answers: 2
continue
Do you know the correct answer?
We know that the output ripple voltage of the regulator constructed in step #1 of the procedure is n...

Questions in other subjects:

Konu
World Languages, 17.12.2019 12:31
Which of these flaws does ulysses reveal while leaving the island after blinding the cyclops?...
Konu
Physics, 17.12.2019 12:31
The distance between the sun and earth is about 1.5 x 10^11m. express this distance with si prefix and in kilograms...
Konu
Chemistry, 17.12.2019 12:31
Which best describes the ph scale? a) acids measure below 7. b) bases measure below 7. c) acids and bases measure above 7. d) bases and acids meas...
Konu
Mathematics, 17.12.2019 12:31
The number 0.8 can be written as 8/10, so it is an irrational number? true or false...
Konu
Biology, 17.12.2019 12:31
Birth, growth, and death are part of a normal a. law of thermodynamics b. evolutionary cycle c. cycle of life d. law of segregati...
Konu
History, 17.12.2019 12:31
How did the election of 1796 differ from the first presidential elections?...
Konu
Mathematics, 17.12.2019 12:31
Find eah missing length to the nearest tenth...
Konu
Mathematics, 17.12.2019 12:31
Ken drew a pair of intersecting rays and marked the angle between them. . which of these statements best compares the pair of intersecting rays with the angle? . a] the rays and...
Konu
Mathematics, 17.12.2019 12:31
Asegment has endpoints (-2,3) and (7,9) how long is the segment...
Konu
Mathematics, 17.12.2019 12:31
Write 144 students in six classes as a unit rate show work...
Other tasks in the category: Engineering More task
See results (0)