Engineering
Engineering, 18.10.2019 07:00, 182075

What is the density of a substance that has a mass of 5gm and is located in an area that
measures 12cm x 10cm x 2cm?

answer
Answers: 3
Get

Other questions on the subject: Engineering

image
Engineering, 26.09.2019 23:00, 22savage2017
In the biopharmaceutical industry, chemical engineers are responsible for the purification of monoclonal antibodies (mabs), which are produced in bioreactors. the purification process for the mabs happens in stages. the mabs are at a concentration of 2.5 g/l in the bioreactor, and are then moved to the stage 1 purification step. 90% of the entering antibodies leave the stage 1 purification step, and move on to the stage 2 purification. only 75% of the antibodies entering stage 2 survive to the product stage. given the above information, answer the following. show how you arrived at all of your answers by writing and solving appropriate balances. a) is this a batch or continuous process? transient or steady state? b) draw and label a flowchart of this process. c) what does the volume of the bioreactor need to be to for a final mabs yield of 5 kilograms? d) given the volume you just calculated, what is the initial weight of the mabs in the bioreactor? e) if the concentration in stage 1 is 15 g/l and in stage 2 is 50 g/l, how do the volumes of stage 1 and stage 2 compare to each other, and to the original bioreactor? explain your reasoning.
Answers: 2
image
Engineering, 26.09.2019 23:00, guadalupemarlene2001
you should always engage the parking brake whenever using any type of lift.
Answers: 3
image
Engineering, 26.09.2019 22:10, dani6651
Adriller is pulling on a stuck drillstring. the derrick is capable of supporting a maximum equivalent derrick load of 5 lbf, the drilling line has a strength of 51200 lbf, and the strength of the drillpipe in tension is 396000 lbf. if eight lines are strung between the crown block and the travelling block and safety factor of 2.0 are required for the derrick, drillpipe and drilling line, how hard can the driller pull trying to free the stuck pipe?
Answers: 1
image
Engineering, 26.09.2019 22:00, mfox793
Refrigerant 22 undergoes a constant-pressure process within a piston–cylinder assembly from saturated vapor at 3.5 bar to a final temperature of 25°c. kinetic and potential energy effects are negligible. evaluate the work and the heat transfer, each in kj per kg of refrigerant.
Answers: 3
Do you know the correct answer?
What is the density of a substance that has a mass of 5gm and is located in an area that
measu...

Questions in other subjects:

Total solved problems on the site: 7162164