Engineering, 14.09.2019 04:30, alannaswitzer

Arigid tank contains 3.52 kg of an ideal gas. the volume of the tank is v1 = 1.20 m^3 and initially the gas is at a pressure of p1 = 225 kpa. the tank is charged by adding 0.74 kg of the same gas at which point the new pressure is 450 kpa and the new temperature is 153.94 °c. determine the gas constant, r, a possible identity of the gas, the original temperature, t1, the original density, rho1, and the original specific volume, v1. lastly, express the final temperature in each of the other common temperature units: °f, k, and r.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 03:10, lauriepdx17

What precautions should you take to prevent injuries when dealing with heavy loads?

Answers: 1

continue

Engineering, 04.07.2019 18:20, myahlit84

Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false

Answers: 3

continue

Engineering, 04.07.2019 18:20, aly95

An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid

Answers: 3

continue

Engineering, 04.07.2019 18:20, rbgrh9465

An open feedwater heater operates at steady state with liquid entering at inlet 1 with t? = 40°c and pl = 1 .2 mpa. water vapor att2-200°c and p2 = 1.2 mpa enters at inlet 2. saturated liquid water exits with a pressure of pa 1.2 mpa. neglect heat transfer with the surroundings and all kinetic and potential energy effects, determine the mass flow rate of steam at inlet 2 if the mass flow rate of liquid water at inlet 1 is given as 2 kg/s.

Answers: 3

continue

Do you know the correct answer?

Arigid tank contains 3.52 kg of an ideal gas. the volume of the tank is v1 = 1.20 m^3 and initially...