Engineering, 07.08.2019 19:20, jimena15

Refrigerant 134a is the working fluid for vapor-compression refrigeration cycle. the evaporator temperature is 8°c and the condenser pressure is 12 bar. saturated vapor enters the compressor and superheated vapor enters the condenser at 60°c and exits the condenser as saturated liquid. for a refrigeration capacity of 8 tons or 2.816 x104 j/s determine the following: (1) the refrigerant mass flow rate in kg/s; (2) the compressor isentropic efficiency (hint: interpolation is required); (3) the compressor power in kw; (4) the system coefficient of performance; and (5) sketch the ts diagram.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, qwertylol12345

Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.

Answers: 2

continue

Engineering, 04.07.2019 18:10, lowkeyqueenk

Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk

Answers: 1

continue

Engineering, 04.07.2019 18:10, Tyrant4life

Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.

Answers: 1

continue

Engineering, 04.07.2019 18:10, Strick1530

Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.

Answers: 2

continue

Do you know the correct answer?

Refrigerant 134a is the working fluid for vapor-compression refrigeration cycle. the evaporator temp...