Engineering, 19.07.2019 20:30, vanessa8527

Afluid with an average speed of 2.1 m/s flows through commercial steel tubing with a diameter of 2 mm and a length of 200 m. the tubing contains 10 regular threaded elbows and the discharge end of the tube is 60 m lower than the inlet. calculate the pressure drop inlet to exit assuming the fluid is: a) air with average properties of 100 c, 200 kpa. b) water at a temperature of 20 c

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, lerasteidl

Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?

Answers: 3

continue

Engineering, 04.07.2019 18:10, xboxdude06

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

Answers: 1

continue

Engineering, 04.07.2019 19:10, netflixacc0107

What is the major difference between thermoplastics and thermosetting plastics from the polymerization structure point of view?

Answers: 2

continue

Engineering, 04.07.2019 19:10, nbunny7208

What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces. a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.

Answers: 1

continue

Do you know the correct answer?

Afluid with an average speed of 2.1 m/s flows through commercial steel tubing with a diameter of 2 m...