After an entry in the medical record has been written or keyed and an error is discovered, what procedure should be followed to correct the error? (a) use a pencil eraser to remove the entry on a written record; then write in the correction. (b) use the delete or backspace key if the entry was keyed in; then key in the correction. (c) draw a line through the error; then call the patient’s physician. (d) none of the above.

The most complicated four letter word

You need to design a circuit that implements the functions in the following table: s0 s1 function0 0 a + 10 1 a – b1 0 a + b1 1 a – 1s0 and s1 are 1-bit control inputs to select the function of the circuit. inputs a and b are 4-bitnumbers in 2s complement form. the output is also a 4-bit number in 2s complement form. you are allowed to use only one ttl 7483 4-bit adder to implement all the functions. but anynumber of other components (except the adder) can be used. hint: design a combinational logic circuit to modify the input b and the “carry input” of theadder depending on the control inputs s0 and s1.important: lab grade will depend on the working of the circuit & will be checked of by your labinstructor.1. is the output valid for the following input combinations: a. s0 = 0, s1 = 0, a = 7, b = 3? b. s0 = 0, s1 = 1, a = 7, b = 3? c. s0 = 1, s1 = 0, a = -4, b = -5? d. s0 = 1, s1 = 1, a = -8, b = 6? 2. what is the range of inputs (for both a and b) that will produce the valid output for all the functions?

You are consulting for a beverage distributor who is interested in determining the benefits it could achieve from implementing new information systems. what will you advise as the first step?