Physics, 21.07.2019 22:20, teionamwhite2262
Suppose you measure a standing person's blood pressure by placing the cuff on his leg 0.560 m below the heart. calculate the pressures you would observe (in units of mm hg) if the pressure at the heart were 119 over 80 mm hg. assume there is no loss of pressure due to resistance in the circulatory system (a reasonable assumption, since major arteries are large).
Answers: 1
Physics, 22.06.2019 00:30, Waakkaa
Glass is transparent to visibile light under normal conditions; however, at extremely high intensities, glass will absorb most of the light incident upon it. this works through a process known as multiphoton absorption. in this process, several photons are absorbed at the same time. if very intense light whose photons carry 2ev of energy is shined onto a material with a band gap of 4ev, that light can be absorbed through two-photon absorption, because two photons have the right amount of energy to bridge the band gap. what is the minimum number of photons of 800-nm light that are needed to equal or exceed the band gap of fused silica glass
Answers: 1
Physics, 22.06.2019 11:00, taylorwhitfield6
Aperson walks first at a constant speed of 4.89 m/s along a straight line from point a to point b and then back along the line from b to a at a constant speed of 2.95 m/s. what is the average speed over the entire trip?
Answers: 1
Physics, 22.06.2019 12:00, angelamirga332
Asolid round steel rod 6.25 mm in diameter and 375 mm long is rigidly bonded to the end of solid square brass rod 25 mm on a side and 300 mm long. the geometric axes of the bare are along the same line. an axial tensile force of 5.4 kn is applied at the extreme ends of the assembly. for steel e = 200 gpa and for brass e = 90 gpa. determine the total elongation for the assembly.
Answers: 1
Suppose you measure a standing person's blood pressure by placing the cuff on his leg 0.560 m below...
Mathematics, 19.02.2021 17:20