Will mark watson, a mountaineer, attempts to jump over a ravine that is 7 meters wide and 10 meters deep within 2 seconds to escape an approaching avalanche. calculate the minimum speed with which he should attempt the jump so that he safely gets to the other side of the ravine.

In a steady-flow steam power plant system, two adiabatic high-pressure and low-pressure turbines ane used to generate power. superheated steam enters the high-pressure turbine at 8 mpa and 550°c. the steam expands in the high-pressure turbine to a saturated vapor at 3 mpa. in order to increase the powe generation of the power plant, another steam turbine working in a lower pressure ranges is deployed. the outlet vapor from the first turbine is heated up at a boiler to the temperature of 500 c at the constant pressure of first turbine's outlet (3 mpa). then, the vapor enters the second turbine and produces extra work. the exit conditions of the second turbine are 5o kpa and 90 percent quality. if the total power output of the power plant is 25 mw, determine a) the mass flow rate of the water (kg/s). b) heat transfer rate in the boiler (mw). (30 points) 3 mpa 00 c 8 mpa s0 c high pres turbine low pres boiler turbine 50 kpa 3 mpa 09 saturated vapor t heat engine, shown in the figure, operates between high temperature and low temperature of through a heat 4. a carnot tn and tu respectively. this heat engine receives energy from a heat reservoir at t exchanger where the heat transferred is proportional to the temperature difference as ? = k (z,-7, ). it rejects heat at a given low temperature tl. to design the heat engine for maximum work output, find the high temperature, th, as a function of tes and t. (15 points) qe

Ineed ! using proper grammar, spelling, and punctuation, write at least one 5 sentence paragraph describing 3 ways we use the elements of the electromagnetic spectrum (ems) in our everyday lives.

The great sandini is a 60.0-kg circus performer who is shot from a cannon (actually a spring gun). you don’t find many men of his caliber, so you him design a new gun. this new gun has a very large spring with a very small mass and a force constant of 1100 n/m that he will compress with a force of 4400 n. the inside of the gun barrel is coated with teflon, so the average friction force will be only 40.0 n during the 4.00 m he moves in the barrel. at what speed will he emerge from the end of the barrel, 2.50 m above his initial rest position?