The primary of a step-up transformer is connected across the terminals of a standard wall socket, and resistor 1 with a resistance r1 is connected across the secondary. the current in the resistor is then measured. next, resistor 2 with a resistance r2 is connected directly across the terminals of the wall socket (without the transformer). the current in this resistor is also measured and found to be the same as the current in resistor 1. how does the resistance r2 compare to the resistance r1? answers

Suppose that two tanks, 1 and 2, each with a large opening at the top, contain different liquids. a small hole is made in the side of each tank at the same depth 1.57 m below the liquid surface, but the hole in tank 2 has 2.49 times the cross-sectional area of the hole in tank 1. (a) what is the ratio ρ1/ρ2 of the densities of the liquids if the mass flow rate is the same for the two holes? (b) what is the ratio rv1/rv2 of the volume flow rates from the two tanks? (c) at one instant, the liquid in tank 1 is 14.9 cm above the hole. if the tanks are to have equal volume flow rates, what height above the hole must the liquid in tank 2 be just then?

The solar panels used by mark function because of the photoelectric effect. light shines on the cells causing electrons to be ejected from the metal, which produces an electric current. at night on mars, no light will fall on the solar cells and no electric current will be generated. according to your notes, what type of light is typically needed to cause the photoelectric effect? a)visible b)ultraviolet c)infrared

What are similarities and differences of reflection, refraction, diffraction and absorption?