Physics
Physics, 09.07.2019 15:10, smartgirl9989

Aspacecraft is separated into two parts by detonating the explosive bolts that hold them together. the masses of the parts are 1300 kg and 1700 kg. the magnitude of the impulse on each part from the bolts is 210 n · s. with what relative speed do the two parts separate because of the detonation?

answer
Answers: 1

Other questions on the subject: Physics

image
Physics, 22.06.2019 05:30, gunnatvinson
What tightening torque should be used for a hexagonal head screw (not split-bolt) on a 250 kcmil conductor?
Answers: 3
image
Physics, 22.06.2019 07:30, babygreg2001p97abr
Boxing gloves are padded to lessen the force of a blow. (a) calculate the force exerted by a boxing glove on an opponent’s face, if the glove and face compress 7.50 cm during a blow in which the 7.00-kg arm and glove are brought to rest from an initial speed of 10.0 m/s. (b) calculate the force exerted by an identical blow in the gory old days when no gloves were used and the knuckles and face would compress only 2.00 cm. (c) discuss the magnitude of the force with glove on. does it seem high enough to cause damage even though it is lower than the force with no glove?
Answers: 1
image
Physics, 22.06.2019 10:50, afonseca73
Asheet of steel 1.5 mm thick has nitrogen atmospheres on both sides at 1200oc and is permitted to achieve a steady-state diffusion condition. the diffusion coefficient for nitrogen in steel at this temperature is 6 x 10- 11 m2 /s, and the diffusion flux is found to be 1.2 x 10-7 kg/m2 -s. also, it is known that the concentration of nitrogen in the steel at the high-pressure surface is 4 kg/m3 . how far into the sheet from this high-pressure side will the concentration be 2.0 kg/m3 ? assume a linear concentration profile.
Answers: 3
image
Physics, 22.06.2019 11:50, sillslola816oxb5h7
The scalar triple product computes the magnitude m of the moment of a force vector f about a specified line. it is m = (r × f) · n, where r is the position vector from the line to the point of application of the force and n is a unit vector in the direction of the line. use matlab to compute the magnitude m for the case where f = [12, −5, 4] n, r = [−3, 5, 2] m, and n = [6, 5, −7].
Answers: 3
Do you know the correct answer?
Aspacecraft is separated into two parts by detonating the explosive bolts that hold them together. t...

Questions in other subjects:

Konu
Mathematics, 27.05.2021 20:50
Konu
Mathematics, 27.05.2021 20:50
Konu
Mathematics, 27.05.2021 20:50