HEYYY EVERYONE !! PLEASE HELP! <33 There are many diseases that can affect the eyesight of people. These diseases are often caused by many different things such as poor nutrition, heredity, or accidents. Choose a disease that affects the eyes and research it, then write an informational brochure about the disease. Your brochure should include what the disease is and how it is caused, how the disease can be treated if the disease can be prevented, the effect it has on your eyesight, pictures of your disease, and any other important information about the disease. Have great day!

An astronomer at the equator measures the doppler shift of sunlight at sunset. from this, she calculates that earth’s tangential velocity at the equator is 465 m/s. the centripetal acceleration at the equator is 3.41  10 2 m/s 2 . use this data to calculate earth’s radius.

Three archers each fire four arrows at a target. joe’s four arrows hit at points 10 cm above, 10 cm below, 10 cm to the left, and 10 cm to the right of the center of the target. all four of moe’s arrows hit within 1 cm of a point 20 cm from the center, and flo’s four arrows hit within 1 cm of the center. the contest judge says that one of the archers is precise but not accurate, another archer is accurate but not precise, and the third archer is both accurate and precise. which description applies to which archer? explain

Athin plate moves between two parallel, horizontal, stationary flat surfaces at a constant velocity of v = 7.5 m/s. the two stationary surfaces are spaced 4 cm apart, and the medium between them is filled with oil whose viscosity is 0.9 n·s/m2. the part of the plate immersed in oil at any given time is 2 m long and 0.5 m wide. if the plate moves through the mid-plane between the surfaces, determine the force required to maintain this motion. what would your response be if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top surface (h1)? if the plate moves through the mid-plane between the surfaces, the force required to maintain the motion will be n. if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top (h1) surface, the force required to maintain the motion would be n.