Physics
Physics, 15.01.2022 15:20, Tyrant4life

1) what is the potential energy at the end of the loop? 2)what is the kinetic energy at the end of the loop(based upon photogate time?

release the car and record the time from the photogate at the bottom of the hill and answer the top questions:
i attached an image that shows the recorded time this is a class work but i’m trying to get better at it


1) what is the potential energy at the end of the loop?

2)what is the kinetic energy at the end o

answer
Answers: 3

Other questions on the subject: Physics

image
Physics, 22.06.2019 05:00, bbygrl70
Aperson stands on a platform, initially at rest, that can rotate freely without friction. the moment of inertia of the person plus the platform is ip. the person holds a spinning bicycle wheel with its axis horizontal. the wheel has moment of inertia iw and angular velocity ωw. take the ωw direction counterclockwise when viewed from above. part a what will be the angular velocity ωp of the platform if the person moves the axis of the wheel so that it points vertically upward?
Answers: 1
image
Physics, 22.06.2019 15:20, mjwaple57
Acarpenter builds an exterior house wall with a layer of wood 2.9 cm thick on the outside and a layer of styrofoam insulation 2.3 cm thick on the inside wall surface. the wood has k=0.080w/(m⋅k), and the styrofoam has k= 0.010 w/(m⋅k). the interior surface temperature is 19.0 ∘c , and the exterior surface temperature is -15.0 ∘c . a.)what is the temperature at the plane where the wood meets the styrofoam? celsius b.)what is the rate of heat flow per square meter through this wall? /m^2
Answers: 2
image
Physics, 22.06.2019 22:00, shahrukhafridi2668
Which best term to describe a chemical reaction that absorbs energy from its surroundings? a. thermal conductor b. thermal insulator c. endothermic d. exothermic
Answers: 1
image
Physics, 23.06.2019 03:00, blancademarco1994
A75-hp (shaft output) motor that has an efficiency of 91.0 percent is worn out and is to be replaced by a high-efficiency motor that has an efficiency of 95.4 percent. the motor operates 4368 hours a year at a load factor of 0.75. taking the cost of electricity to be $0.12/kwh, determine the amount of energy and money saved as a result of installing the high-efficiency motor instead of the standard motor. also, determine the simple payback period if the pu
Answers: 1
Do you know the correct answer?
1) what is the potential energy at the end of the loop? 2)what is the kinetic energy at the end of...

Questions in other subjects: