Physics
Physics, 10.01.2022 09:00, lailabirdiemae

What mathematical expression do you use to calculate the pressure due to liquid at a given depth? Explain each term.

answer
Answers: 1

Other questions on the subject: Physics

image
Physics, 22.06.2019 03:00, ambercuevas2707
An internally reversible refrigerator has a modified coefficient of performance accounting for realistic heat transfer processes of where qin is the refrigerator cooling rate, qout is the heat rejection rate, and is the power input. show that copm can be expressed in terms of the reservoir temperatures tc and th, the cold and hot thermal resistances rt, c and rt, h, and qin, as where rtot rt, c rt, h. also, show that the power input may be expressed as 1.39 a household refrigerator operates with cold- and hot-temperature reservoirs of tc 5 c and th 25 c, respectively. when new, the cold and hot side resistances are rc, n 0.05 k/w and rh, n 0.04 k/w, respectively. over time, dust accumulates on the refrigerator’s condenser coil, which is located behind the refrigerator, increasing the hot side resistance to rh, d 0.1 k/w. it is desired to have a refrigerator cooling rate of qin 750 w. using the results of problem 1.38, determine the modified coefficient of performance and the required power input w under (a) clean and (b) dusty coil conditions. internally reversible refrigerator qout qin w high-temperature reservoir low-temperature reservoir th th, i tc, i tc high-temperature side resistance low-temperature side resistance w qin th tc qinrtot tc qinrtot copm tc qinrtot th tc
Answers: 2
image
Physics, 22.06.2019 06:30, 1234fatimasm
What are similarities and differences between refraction, reflection, diffraction and absorption?
Answers: 3
image
Physics, 22.06.2019 08:20, jrjordans13ox06qs
At an oceanside nuclear power plant, seawater is used as part of the cooling system. this raises the temperature of the water that is discharged back into the ocean. the amount that the water temperature is raised has a uniform distribution over the interval from 10° to 25° c. what is the standard deviation of the temperature increase?
Answers: 1
image
Physics, 22.06.2019 18:50, mariposa91
Avertical clean glass piezometer tube has an inside diameter of d = 1 mm and is used to measure pressure in a horizontal pipe carrying water as shown. due to pressure in the pipe, the water at 20c rises into the tube to a height h. if the water pressure in the pipe is p = 500 pa gauge, estimate the height h: (a) without considering surface tension (b) with surface tension (capillary) effects. the contact angle  can be assumed at 30 deg
Answers: 2
Do you know the correct answer?
What mathematical expression do you use to calculate the pressure due to liquid at a given depth? Ex...

Questions in other subjects:

Konu
Mathematics, 26.01.2021 14:50
Konu
Mathematics, 26.01.2021 14:50
Konu
Mathematics, 26.01.2021 14:50
Konu
Physics, 26.01.2021 14:50