Physics
Physics, 10.01.2022 06:20, Furyplayzzz

Paku yang luas penampangnya 3mm² akan ditancapkan ke papan kayu. Bila paku di pukul dengan gaya 0,9N berapa tekanan yang diterima papan kayu? A nail with a cross-sectional area of 3mm² will be driven into a wooden plank. If the nail is struck with a force of 0.9N, how much pressure does the wooden board receive?

answer
Answers: 3

Other questions on the subject: Physics

image
Physics, 22.06.2019 02:30, bellamore
Awave travels at a speed of 5.2 m/s. if the distance between crests is 0.40 m, what is the frequency of the wave? use f=v/wavelength a. 13 hz b. 2.1 hz c. 0.077 hz d. 5.6 hz
Answers: 1
image
Physics, 22.06.2019 02:50, lilybear1700
Steam is generated in a boiler of a cogeneration plant at 10 mpa and 450°c at a steady rate of 5 kg/s. in normal operation, steam expands in a turbine to a pressure of 0.5 mpa and is then routed to the process heater, where it supplies the process heat. steam leaves the process heater as a saturated liquid and is pumped to the boiler pressure. in this mode, no steam passes through a condenser, which operates at 20 kpa. (a) determine the power produced in the turbine and the rate at which process heat is supplied in this mode. (b) determine the power produced in the turbine and the rate of process heat supplied if only 60 percent of the steam is routed to the process heater and the remainder is expanded to the condenser pressure. (3.32 mw; 9.69 mw; 4.25 mw; 5.82 mw)
Answers: 3
image
Physics, 22.06.2019 12:00, stephanieboyd
Explain why electric current cannot exist if a current doesn't have a voltage source.
Answers: 2
image
Physics, 22.06.2019 18:30, sarinaneedshelp01
A1000-kg car is moving at 30 m/s around a horizontal unbanked curve whose diameter is 0.20 km. what is the magnitude of the friction force required to keep the car from sliding?
Answers: 3
Do you know the correct answer?
Paku yang luas penampangnya 3mm² akan ditancapkan ke papan kayu. Bila paku di pukul dengan gaya 0,9N...

Questions in other subjects:

Konu
English, 13.07.2019 12:30