PLZZZ HELP I WILL DEFINITELY MARK U How much work does it take to carry a 30 kg holiday tree up a 15 m flight of stairs? If this takes 3 minutes, how much power is exerted?

Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)

Which statement correctly describes the current in a circuit that is made up of any two resistors connected in parallel with a battery? a. the current in the battery and in each resistor is the same b. the current the battery equals to the sum of the currents in the resistors c. the current in the battery is less than the current in either resistor d. the current in the battery equals to the product of the currents in the resistors

Cathy is pedaling down a steep hill on her bicycle and wants to be able to coast up the next hill, which is 25 meters high, without pedaling. cathy and her bicycle have a mass of 75 kg. assuming her bicycle is 100% efficient, what would her speed have to be?