Physics, 22.12.2021 23:50, ivankerwin
Calculate the first and second velocities of the car with two washers attached to the pulley, using the formulas v1 = 0. 25 m / t1, and v2 = 0. 25 m / (t2 â€" t1) where t1 and t2 are the average times the car took to reach the 0. 25 and the 0. 50 meter marks. Record these velocities, to two decimal places, in Table E. What is the first velocity of the car with two washers at the 0. 25 meter mark? m/s What is the second velocity of the car with two washers at the 0. 50 meter mark? m/s.
Answers: 1
Physics, 22.06.2019 10:50, afonseca73
Asheet of steel 1.5 mm thick has nitrogen atmospheres on both sides at 1200oc and is permitted to achieve a steady-state diffusion condition. the diffusion coefficient for nitrogen in steel at this temperature is 6 x 10- 11 m2 /s, and the diffusion flux is found to be 1.2 x 10-7 kg/m2 -s. also, it is known that the concentration of nitrogen in the steel at the high-pressure surface is 4 kg/m3 . how far into the sheet from this high-pressure side will the concentration be 2.0 kg/m3 ? assume a linear concentration profile.
Answers: 3
Physics, 22.06.2019 11:50, azertyqwerty123
Two resistors r1 and r2 may be connected either in series or parallel across an ideal battery with emf ε. we desire the rate of energy dissipation of the parallel combination to be 8.75 times that of the series combination. if r1 = 105 ω, what are the (a) smaller and (b) larger of the two values of r2 that result in that dissipation rate?
Answers: 2
Physics, 22.06.2019 18:00, Yungnaudie
Astudent weighing 700 n climbs at constant speed to the top of an 8 m vertical rope in 10 s. the average power expended by the student to overcome gravity is most nearly
Answers: 2
Calculate the first and second velocities of the car with two washers attached to the pulley, using...
Mathematics, 25.05.2021 01:20
History, 25.05.2021 01:20
Mathematics, 25.05.2021 01:20
Mathematics, 25.05.2021 01:20
Mathematics, 25.05.2021 01:20
Mathematics, 25.05.2021 01:20
Chemistry, 25.05.2021 01:20