A very dense 1500-kg point mass (A) and a dense 1200-kg point mass (B) are held in place 1.00 m apart on a frictionless table. A third point mass is placed between the other two at a point that is 20.0 cm from B along the line connecting A and B. When the third mass is suddenly released, find the magnitude and direction (toward A or toward B) of its initial acceleration.

Identify the amplitude on the diagram and give the correct description. question 3 options: a because amplitude is the distance from wave crest to wave crest. b because the wavelength shows amplitude. c because amplitude is the distance between a crest (or trough) and rest. d because wavelength show amplitude. (brainiest if you get it right! ) ~kayla

Steam is generated in a boiler of a cogeneration plant at 10 mpa and 450°c at a steady rate of 5 kg/s. in normal operation, steam expands in a turbine to a pressure of 0.5 mpa and is then routed to the process heater, where it supplies the process heat. steam leaves the process heater as a saturated liquid and is pumped to the boiler pressure. in this mode, no steam passes through a condenser, which operates at 20 kpa. (a) determine the power produced in the turbine and the rate at which process heat is supplied in this mode. (b) determine the power produced in the turbine and the rate of process heat supplied if only 60 percent of the steam is routed to the process heater and the remainder is expanded to the condenser pressure. (3.32 mw; 9.69 mw; 4.25 mw; 5.82 mw)

Drag each tile to the correct box. tiles bra i sequence