Physics
Physics, 13.12.2021 01:00, wedderman8292

You pull a 48 kg child in a wagon by pulling with a force of 187 N along the handle which is at 12 degrees above the horizontal. If the wagon moves at a constant velocity of 3.8 m/s, what is the coefficient of kinetic friction between the
wheels and the sidewalk?

answer
Answers: 2

Other questions on the subject: Physics

image
Physics, 22.06.2019 12:20, ginachuquiano450
Aball with a mass of 275 g is dropped from rest, hits the floor and rebounds upward. if the ball hits the floor with a speed of 2.40 m/s and rebounds with a speed of 1.70 m/s, determine the following. (a) magnitude of the change in the ball's momentum (let up be in the positive direction.)
Answers: 1
image
Physics, 22.06.2019 14:10, nikki4367
Amachinist turns the power on to a grinding wheel, at rest, at time t = 0 s. the wheel accelerates uniformly for 10 s and reaches the operating angular velocity of 96 rad/s. the wheel is run at that angular velocity for 40 s and then power is shut off. the wheel slows down uniformly at 1.5 rad/s2 until the wheel stops. in this situation, the time interval of deceleration is closest to:
Answers: 3
image
Physics, 22.06.2019 23:40, naomi5321
A2.50 ร— 105 w motor is used for 26.4 s to pull a boat straight toward shore. how far does the boat move toward shore if a force of 4.20 ร— 104 n is applied by the motor?
Answers: 2
image
Physics, 23.06.2019 02:10, Nathaliasmiles
Find the steady-state temperature at the center of the plate = /2, = /2) for sums of w from n=1 to n=19 (only odd values). find the value of n for which the change in /2, /2) is less than 1% from the value at the previous n. at this point, we consider the solution converged. does the value of the temperature at the center seem reasonable? in this part, the values of x and y are constant scalar values. you should produce a plot of the value of n on the horizontal and the estimate of the temperature at the center of the plate on the vertical. b. using the value of n (or larger) that resulted in convergence in part (a), create a contourf plot of the temperature distribution across the entire plate. use enough spatial subdivisions to create a useful plot. comment on the results. hint: you need to determine what โ€œxโ€ and โ€œyโ€ values to use to make your t matrix. i recommend using a different number of x and y values. use enough x and y values so that the plot is โ€œsmoothโ€.
Answers: 1
Do you know the correct answer?
You pull a 48 kg child in a wagon by pulling with a force of 187 N along the handle which is at 12 d...

Questions in other subjects:

Konu
Mathematics, 31.01.2020 20:43