What force must be exerted on the master cylinder of a hydraulic lift to support the weight of a 1850-kg car (a large car) resting on a second cylinder

Steam is generated in a boiler of a cogeneration plant at 10 mpa and 450°c at a steady rate of 5 kg/s. in normal operation, steam expands in a turbine to a pressure of 0.5 mpa and is then routed to the process heater, where it supplies the process heat. steam leaves the process heater as a saturated liquid and is pumped to the boiler pressure. in this mode, no steam passes through a condenser, which operates at 20 kpa. (a) determine the power produced in the turbine and the rate at which process heat is supplied in this mode. (b) determine the power produced in the turbine and the rate of process heat supplied if only 60 percent of the steam is routed to the process heater and the remainder is expanded to the condenser pressure. (3.32 mw; 9.69 mw; 4.25 mw; 5.82 mw)

Which type of basaltic lava flow has a fairly smooth

Aracecar driver has to hold on tightly when going around a banked curve. approximately what is the centripetal force on a 2220.0 kg car going around a circle with a diameter of 190.0 meters at 25.0 m/s?