Physics, 09.12.2021 02:20, uaodiase

A 1,200-kg car is on the 4.0-m-radius elevating platform of a hydraulic lift. The radius of the input piston is 10 cm. An incompressible fluid fills the volume of the chamber that separates the two pistons. With what force must a worker apply to the input piston to begin lifting the car

Answers: 3

Show answers

Other questions on the subject: Physics

Physics, 22.06.2019 12:20, ginachuquiano450

Aball with a mass of 275 g is dropped from rest, hits the floor and rebounds upward. if the ball hits the floor with a speed of 2.40 m/s and rebounds with a speed of 1.70 m/s, determine the following. (a) magnitude of the change in the ball's momentum (let up be in the positive direction.)

Answers: 1

continue

Physics, 22.06.2019 13:30, brsglover8355

6–43 a food department is kept at 2128c by a refrigerator in an environment at 308c. the total heat gain to the food department is estimated to be 3300 kj/h and the heat rejection in the condenser is 4800 kj/h. determine the power input to the compressor, in kw and the cop of the refrigerator.

Answers: 2

continue

Physics, 22.06.2019 14:30, abbz13

Give one example to show that when substances are mixed, it may result in a chemical or a physical change depending on the conditions.

Answers: 2

continue

Physics, 22.06.2019 15:30, 2605098

Ametal ring 4.20 cm in diameter is placed between the north and south poles of large magnets with the plane of its area perpendicular to the magnetic field. these magnets produce an initial uniform field of 1.12 t between them but are gradually pulled apart, causing this field to remain uniform but decrease steadily at 0.240 t/s . (a) what is the magnitude of the electric field induced in the ring? (b) in which direction (clockwise or counterclockwise) does the current flow as viewed by someone on the south pole of the magnet?

Answers: 2

continue

Do you know the correct answer?

A 1,200-kg car is on the 4.0-m-radius elevating platform of a hydraulic lift. The radius of the inpu...