9. As shown in Fig. B9, a block of mass m2=2.1 kg sits on an inclined plane with angle 35 degrees . The coefficients of static and kinetic friction between the block and the plane are unknown. The block is attached to a rope, which is hung over a frictionless and massless pulley and attached to a hanging mass m1.
(a) The block my is on the verge of sliding, when the hanging mass is increased to m1=1.6kg.
01. find the coefficient of static friction.

As shown in Fig. Bob, an identical block (with mass m2) is placed on top of the block on the inclined plane. The hanging mass m1 remains unchanged. The two blocks on the inclined plane are sliding down the incline with the same acceleration a=0.31 m/s^2
Find
02.the coefficient of kinetic friction.
03.what is the minimum value of the coefficient of static friction between the two identical blocks (m2) so that they move together?

Na food processing facility, a spherical container of inner radius r1 5 40 cm, outer radius r2 5 41 cm, and ther- mal conductivity k 5 1.5 w/m · k is used to store hot water and to keep it at 100°c at all times. to accomplish this, the outer surface of the container is wrapped with a 800-w electric strip heater and then insulated. the temperature of the inner surface of the container is observed to be nearly 120°c at all times. as- suming 10 percent of the heat generated in the heater is lost through the insulation, (a) express the differential equation and the boundary conditions for steady one-dimensional heat conduction through the container, (b) obtain a relation for the variation of temperature in the container material by solving the differential equation, and (c) evaluate the outer surface tempera- ture of the container. also determine how much water at 100°c this tank can supply steadily if the cold water enters at 20°c.

Mass (kg) force (n) 5 25 10 50 15 75 20 100 a student was trying to find the relationship between mass and force. he placed four different masses on a table and pulled them using a spring scale. the table shows the different masses used in the experiment and the force required to pull each mass. the student concluded that more force was required to pull heavier objects. what comment would you make regarding his conclusion? a) no clear relation can be observed between mass and force from the data. b) there is a direct proportion between the mass and force listed in the table. c) gravity should have been taken into account while performing the experiment. d) there is an inverse proportion between the mass and force listed in the table.

The coefficient of friction is a number that represents the resistance to sliding between two in contact with one another.