A 5.0 kg block is pushed 3.0 m at a constant velocity up a vertical wall by a constant force
applied at an angle of 30.0◦ with the horizontal.
The acceleration of gravity is 9.81 m/s² If the coefficient of kinetic friction between
the block and the wall is 0.20, find
a) the work done by the force on the block.
Answer in units of J.
b) the work done by gravity on the block.
Answer in units of J.
c) the magnitude of the normal force between
the block and the wall.
Answer in units of N.

The slotted link is pinned at o, and as a result of rotation it drives the peg p along the horizontal guide. compute the magnitude of the velocity and acceleration of p along the horizontal guide. compute the magnitudes of the velocity and acceleration of p as a function of θ if θ=(3t) rad, where t is measured in seconds.

Which features on mars point to the possibility of liquid water on the planet? impact craters with sharp rims volcanic cones with craters gullies and stream-like channels mountain ranges with faults

Search coils and credit cards. one practical way to measure magnetic field strength uses a small, closely wound coil called a search coil. the coil is initially held with its plane perpendicular to a magnetic field. the coil is then either quickly rotated a quarter-turn about a diameter or quickly pulled out of the field. (a) derive the equation relating the total charge q that flows through a search coil to the magnetic-field magnitude b. the search coil has n turns, each with area a, and the flux through the coil is decreased from its initial maximum value to zero in a time ∆t. the resistance of the coil is r, and the total charge is q = i∆t, where i is the average current induced by the change in flux. (b) in a credit card reader, the magnetic strip on the back of a credit card is rapidly “swiped” past a coil within the reader. explain, using the same ideas that underlie the operation of a search coil, how the reader can decode the information stored in the pattern of magnetization on the strip. (c) is it necessary that the credit card be “swiped” through the reader at exactly the right speed? why or why not?