Physics, 11.11.2021 01:00, thebasedgodchri

Noise from highways is a large issue, particularly for those who live close to the highway. Engineers have come up with several solutions to the problem. One solution can be a high vertical wall. Second, planting vegetation, like trees. Third, using a large buffer zone or open space. Explain how trees, a high wall or buffer zones can reduce the noise from a highway that is heard at a nearby home.
Think…
· How would the noise be for someone in a home?
· How would the noise be for someone driving on the highway?
· How does the DOPPLER EFFECT fit in to this scenario?
You must write a response with a MINIMUM of 5 sentences to receive full credit.
WILL MARK AS BRAINILEST

Answers: 3

Show answers

Other questions on the subject: Physics

Physics, 22.06.2019 07:30, babygreg2001p97abr

Boxing gloves are padded to lessen the force of a blow. (a) calculate the force exerted by a boxing glove on an opponent’s face, if the glove and face compress 7.50 cm during a blow in which the 7.00-kg arm and glove are brought to rest from an initial speed of 10.0 m/s. (b) calculate the force exerted by an identical blow in the gory old days when no gloves were used and the knuckles and face would compress only 2.00 cm. (c) discuss the magnitude of the force with glove on. does it seem high enough to cause damage even though it is lower than the force with no glove?

Answers: 1

continue

Physics, 22.06.2019 11:50, sillslola816oxb5h7

The scalar triple product computes the magnitude m of the moment of a force vector f about a specified line. it is m = (r × f) · n, where r is the position vector from the line to the point of application of the force and n is a unit vector in the direction of the line. use matlab to compute the magnitude m for the case where f = [12, −5, 4] n, r = [−3, 5, 2] m, and n = [6, 5, −7].

Answers: 3

continue

Physics, 22.06.2019 12:00, Emieloy2959

Ihave a density of 1.61g/cm^3 and a mass of 28g. find the missing value

Answers: 1

continue

Physics, 22.06.2019 14:20, jeny89

4r-134a enters the condenser of a residential heat pump at 800 kpa and 50°c at a rate of 0.022 kg/s and leaves at 750 kpa subcooled by 3°c. the refrigerant enters the compressor at 200 kpa superheated by 4°c determine (a) the isentropic efficiency of the compressor, (b) the rate of heat supplied to the heated room, and (c) the cop of the heat pump. also, determine (d) the cop and rate of heat supplied to the heated room if this heat pump operated on the ideal vapor-compression cycle between the pressure limits of 200 and 800 kpa. (0.757, 4.37 kw, 5.12, 6.18, 3.91 kw)

Answers: 3

continue

Do you know the correct answer?

Noise from highways is a large issue, particularly for those who live close to the highway. Engineer...