Tori is performing a physics lab and exerts a constant force on a cart of 2.65 Newtons. The cart accelerates at a rate of 3.92 m/s2. The mass of the cart being accelerated is 0.500 kg. Calculate the coefficient of friction for the cart on the lab table.

Asheet of steel 1.5 mm thick has nitrogen atmospheres on both sides at 1200oc and is permitted to achieve a steady-state diffusion condition. the diffusion coefficient for nitrogen in steel at this temperature is 6 x 10- 11 m2 /s, and the diffusion flux is found to be 1.2 x 10-7 kg/m2 -s. also, it is known that the concentration of nitrogen in the steel at the high-pressure surface is 4 kg/m3 . how far into the sheet from this high-pressure side will the concentration be 2.0 kg/m3 ? assume a linear concentration profile.

Consider a u-tube whose arms are open to the atmosphere. now equal volumes of water and light oil (ρ = 49.3 lbm/ft3) are poured from different arms. a person blows from the oil side of the u-tube until the contact surface of the two fluids moves to the bottom of the u-tube, and therefore, the liquid levels in the two arms are the same. if the fluid height in each arm is 30 in, determine the gage pressure exerted by the person on the oil by blowing.

7.study the scenario. a small container of water with a low temperature is poured into a large container of water with a higher temperature. which choice correctly explains what happens to the thermal energy of these systems? the smaller container of water has more heat and thermal energy than the larger container. some heat and thermal energy is transferred to the larger container of water. the larger container of water has more heat and thermal energy than the smaller container. some heat and thermal energy is transferred to the smaller container of water. the larger container of water has more thermal energy and some of that energy is transferred to the colder water in a process known as heating. the smaller container of water has more thermal energy than the larger container, and some of that energy is transferred to the warmer water in a process known as heating.