Which of the following models would best represent the inner and outer core of Earth, based on the physical characteristics of each layer? A ball of clay (solid) filled with water (liquid

Gelatin (red semi-solid) on top of a cracker (brittle solid)

Rubber ball (flexible solid) painted red (thin solid covering)

A metal ball (solid) suspended in oil (liquid)

Arefrigerator uses r-134a as the working fluid and operates on the ideal vapor-compression refrigeration cycle except for the compression process. the refrigerant enters the evaporator at 120 kpa with a quality of 34 percent and leaves the compressor at 70°c. if the compressor consumes 450 w of power, determine (a) the mass flow rate of the refrigerant, (b) the condenser pressure, and (c) the cop of the refrigerator. (0.00644 kg/s, 800 kpa, 2.03)

Which sections of the heating curve illustrate this process?

One hazard of space travel is debris left by previous missions. there are several thousand masses large enough to detect by radar orbiting the earth, but there are far greater numbers of very small masses such as flakes of paint. calculate the force exerted by a 0.110 mg chip of paint that strikes a space shuttle window at a relative speed of 5.00 ✕ 103 m/s and sticks, given the collision lasts 6.00 ✕ 10-8 s. such a collision chipped the window of the ill-fated challenger in june 1983, causing $50,000 of damage.