You submerge 100 grams of steel in 200 grams of water. If the steel has an initial temperature of 90°C and the water has an initial temperature of 15°C, what is the final temperature of the system? The specific heat capacity of the steel is 0.15 cal/g•°C.

In a wind tunnel the speed changes as the cross sectional area of the tunnel changes. if the speed in a 6' x 6' square test section is 100 mph, what was the speed upstream of the test section where the tunnel measured 20' x 20'? use conservation of mass and assume incompressible flow. conservation of mass requires that as the flow moves through a path or a duct the product of the density, velocity and cross sectional area must remain constant; i. e., that ova-constant. a model is being tested in a wind tunnel at a speed of 100 mph if the flow in the test section is at sea level standard conditions, what is the pressure at the model's stagnation point? (a) the tunnel speed is being measured by a pitot-static tube connected to a u- tube manometer. what is the reading on that manometer in inches of water? (b) at one point on the model a pressure of 2058 psf is measured. what is the local airspeed at that point?

Aregular polygon has angkes of size 150° each. how many side has the polygon

Science and technology are interdependent. advances in one lead to advances in the other. give an example of this phenomenon.