Physics
Physics, 17.09.2021 19:50, BXSUPREME939

is a warning to stop. This is for 8th grade P. E. on Canvas/VOL. Don't answer this unless you're 8th grade or higher and you actually know the answer. So basically unless you take the FLVS 8th grade P. E. class or you have, uhhh don't answer.

answer
Answers: 2

Other questions on the subject: Physics

image
Physics, 21.06.2019 23:30, asco0317p34v1s
Classify the following soils according to the uscs classification system. provide appropriate uscs designations. a) this sample of well-graded gravel with sand was obtained from a large earthen dam in vancouver, canada. the sample has 73% fine to coarse sub-angular gravel, 25% fine to coarse sub-angular sand and 2% fines. the maximum size of the particles is 75 mm. the coefficient of curvature is 2.7, while the uniformity coefficient is 12.4. b) this dark brown and wet soil with a “strong organic odor” has 100% passing the no. 200 sieve. the liquid limit of the material is 32% when not dried and is 21% when oven-dried. the plastic index is 21% when not dried. c) this sand has 61% predominantly fine sand, 23% silty fines, and 16% fine sub-rounded gravel size. the maximum size is 20 mm. the liquid limit is 33% and the plastic limit is 27%. d) this soil has 74% fine to coarse sub-angular reddish sand and 26% organic and silty dark brown fines. the liquid limit is 37% when not dried and is 26% when oven dried. the plastic index is 6% when not dried.
Answers: 1
image
Physics, 22.06.2019 12:30, madlenserlipepu1o
Hydrogen atoms are excited by a laser to the =4n=4 state and then allowed to emit. what is the maximum number of distinct emission spectral lines (lines of different wavelengths) that can be observed from this system? 8 6 2 7 4 5 1 3 calculate the wavelength of the 4⟶14⟶1 transition. =λ=
Answers: 2
image
Physics, 22.06.2019 15:10, jvsome8
What does si stand for, when referring to a system of measurement
Answers: 1
image
Physics, 22.06.2019 15:30, tiffuuu
At 20∘c, the hole in an aluminum ring is 2.800 cm in diameter. you need to slip this ring over a steel shaft that has a room-temperature diameter of 2.804 cm . 1. to what common temperature should the ring and the shaft be heated so that the ring will just fit onto the shaft? coefficients of linear thermal expansion of steel and aluminum are 12×10−6 k−1 and23×10−6 k−1 respectively.
Answers: 1
Do you know the correct answer?
is a warning to stop. This is for 8th grade P. E. on Canvas/VOL. Don't answer this unless you're 8...

Questions in other subjects:

Konu
Mathematics, 24.11.2020 16:20