Pressure cookers have been around for more than 300 years, although their use has strongly declined in recent years (early models had a nasty habit of exploding). How much force must the latches holding the lid onto a pressure cooker be able to withstand if the circular lid is 25.0 cm in diameter and the gauge pressure
inside is 300 atm? Neglect the weight of the lid

Apassenger walks toward the rear of a moving train. describe her motion as seen from a reference point on the train. then describe it from a reference point on the ground

Atank has a shape of a cone with a radius at the top of 2 m and a height of 5 m. the tank also has a 1 m spout at the top of the tank. the tank is filled with water up to a height of 2 m. find the work needed to pump all the water out the top of the spout. (use 9.8 m/s2 for g and the fact that the density of water is 1000 kg/m3.)

Amerry-go-round of radius r, shown in the figure, is rotating at constant angular speed. the friction in its bearings is so small that it can be ignored. a sandbag of mass m is dropped onto the merry-go-round, at a position designated by r. the sandbag does not slip or roll upon contact with the merry-go-round. how would you rank the following different combinations of m and r on the basis of the angular speed of the merry-go-round after the sandbag "sticks" to the merry-go-round from largest to smallest. a) m = 10kg, r = 0.25r b) m = 20kg, r = 0.25r c) m = 10kg, r = 0.50r d) m = 10kg, r = 1.0r e) m = 15kg, r = 0.75r f) m = 40kg, r = 0.25r